Let’s begin! If you are a newbie in Longboarding, you definitely need to know about How to stop on a Longboard, don’t you? Braking is one of the techniques that causes more fear and more effort costs many skaters. Braking is vital for skater development. It is important to control the balance more and more in order to learn how to stop it.
There are different ways of braking all from smooth and progressive braking to sudden braking. Braking with the foot is very simple. It is nothing more than putting the sole lightly on the ground, causing friction while moving. You can control the rate you want from deceleration by the pressure you put on the ground. This only works at lower speeds, so be careful. If you try the footbrake at high speed, you will fly to one side and the longboard to the other side and the fall will be ugly. Move forward to see the tips and tricks.
Method 1: Wedge Brake
We have the wedge brake for the most basic levels. For this brake, we must go skating with the parallel skids and go progressively opening the legs. It is important to have the knees bent and to go tilting the guides of the skates or wheels inwards. It looks like braking on skiing, but there is no end to the brake. You must turn the tips of the skates inwards and exert force with the heels out. All this with the legs open, it seems difficult but it is easier in practice. Sometimes breaking the longboard will not be possible and some scratches and bruises will be predictable. Falling sadly will be the solution, but a more serious accident could be avoided. You need experience and safety equipment to do this such as helmets, elbow pads, gloves, and knee pads.
Method 2: Brake with the cue
The second way to brake is with the cue. This is the resistance of the rubber on the floor. The cue is generally in the right skate. To brake, we must make scissors with the parallel feet. Open one foot forward and one back and go bending the knees. Especially the left leg as if we were going to sit. While we stretched the leg of the skate with the cue, we unload the weight on the back leg. Raise the tip of the skate of the stretched leg in front of this form we press the rubber of the brake pad against the ground and brake. The more pressure the block has on the ground, the stronger we can stop longboard.
Method 3: A good level of skating
The third option is to brake requires a good level of skating because you need a lot of control and balance. This brake consists of delaying a skate and placing it at a 90-degree angle behind the front skate. Caressing the ground bit by bit with the back leg as if you were sweeping the ground, as more weight you put on the shorter back leg will be the braking. You must be aware that this type of braking spends the wheels of your skates. So you must alternate your feet and rotating the wheels of your skates.
Method 4: How to stop at high speeds
The fourth way is power slide brakes we expose the brake in a skid in this article. You need to know how to do it at high speeds and should have a higher level of skating skill as well. It is important to inform you that you must know how to control the turns and changes of direction on skates as well as knowing how to skate backward with ease. This type of brake is more effective at high speed but requires complete control of your body. The simplest way to make a change of direction to skate on your back bends the knee. Place the weight on the leg in front of you and with the other leg make a wide half circle. So that the guide or the wheels are tilted and in turn sliding to the floor until you achieve exactly behind you. So that leg will be in the opposite direction and with the friction of the ground, it will stop.
Method 5: How to slide stop
The slide is another technique for anyone who wants to know how to stop the longboard. The use of gloves is essential to put into practice. This maneuver consists of throwing all your weight on your front foot, while the back foot will serve to push the skateboard by the edge, while you support one hand on the ground and the other security in the shape. It is critical that you choose spikes that are compatible with your longboard experience. Raise the tip of the board by going into manual until the tail touches the ground. The friction created will slow gradually down the skate. If you are going to quickly remember not to brake in this way to force, otherwise you will fall. Professionals often prefer to rest gently one foot on the ground in order to slow down with sweetness.
Method 6: How to stop without gloves
Power slide is another method to know about. Take an assured speed not excessive if you are at the beginning smooth, surfaces and soft tires are preferred. Push hard with the back foot forward to turn the board at the beginning trying to face a maximum curve. Do not try to turn the board 90 degrees immediately. Try to align your shoulders and push your body back to stay in balance. Do not lift the table otherwise; there will be a risk falling possibility.
Method 7: Pushing the skate
It is the same position that we use when pushing the skate. Place your front foot along the front of the board. The foot should be facing forward, in a similar direction you want to move. Your rear foot should be placed in the back, in its normal position. Lift the back foot and go crawling on the ground as an anchor until the skateboard comes to a complete stop. It is important that the weight should be well centered on your front foot to avoid imbalances.
Don’t forget to check the tricks on longboard carving. We have explained the detailed process of doing it.
Now that you know how to stop on a longboard, it is a practice to win a few scratches at the beginning and get down the increasingly challenging slopes. Remember that the important thing is to practice safety. Avoid descents that end up with nothing and that need abrupt stops. So knowing how to stop the longboard will not be so primordial. Avoid hills with blind spots where cars can come out of nowhere. Choosing a decent consistent with what you know you can do is the first way to avoid a more serious accident. It is also important that you always use the back foot and leave the front stable on top of the longboard.